Cycloidal Gearbox – CH Series (Hollow-core)
- CH的设计主要是针对间歇运行模式，如果是连续运行模式，允许的输出扭矩和转速不可超过表中额定输出扭矩和最大输出转速的60%（最大70%），CK表面温度不可超过80℃。Designed primarily for intermittent operation, the CH series mandates that during continuous operation the output torque and speed must not exceed 60% (up to 70% maximum) of
Naming Convention
Rated Parameters
- CH is designed mainly as intermittent periodic duty. For continuous operation duty application, those series should not exceed 60% (max. 70%) of rated output torque and maximum output speed on the specifications or CH surface temperature should be settling within max. 80°C.
- Rated output torque and rated output speed is set for life time as 6000 hours. (Refer CH model selection.)
- Even though output torque raised by life- time calculation, due to the fact, output speed is low, it should not exceed maximum average output torque.
- Previous：There is no more.
- Next：There is no more.
